23 can you shoot 7.62 x51 out of a 308 rifle Full Guide

23 can you shoot 7.62 x51 out of a 308 rifle Full Guide

You are reading about can you shoot 7.62 x51 out of a 308 rifle. Here are the best content by the team littleeagles.edu.vn synthesize and compile, see more in the section How to.

308 VS 7.62 NATO [1]

Perhaps you’ve felt overwhelmed looking for the best barrel length for 308? From bolt actions to semi-automatics, the…. Comparing .308 vs 7.62 NATO is like describing twin brothers with different personalities – these rounds are almost identical in every way
However, it turns out there are several legitimate distinctions between these two rounds. Though small, these details can impact how you use the .308 and 7.62 NATO.
Understandably, this can be confusing, so we’ll walk through it step-by-step.. Since these two rounds are identical in appearance, some might believe the .308 and the 7.62 NATO are the same round

Dive into anything [2]

This subreddit is for the discussion of Canadian firearms ownership, shooting sports, safety of firearms, Gun Clubs, Firearms groups, advocacy, and the Canadian political effects.. Recently got a Savage 110 Apex Storm .308 win rifle
Is it safe to shoot in 308 win? Do I need a certain type of 7.62×51? If so what do I need?. New comments cannot be posted and votes cannot be cast.

7.62 NATO vs. .308: Is There a Difference? [3]

The idea for a short-action cartridge rivaling .30-06 performance has been around since before the Depression. But once the M1 Garand carried us through World War II, military circles took up the short-.30 banner with an experimental infantry round.
In a fit of brilliance, Winchester snatched the design for its hunting roster and in 1952 dubbed it the .308. Army adopted the 7.62×51 cartridge and urged its acceptance by NATO, which complied in 1957.
When the M16 replaced the M14 in the Vietnam War during the 1960s (read my article comparing 5.56 NATO vs. .223 here), production of 7.62x51mm ammunition continued.

Can You Shoot 7.62×51 Ammo in A .308 Rifle in 2023? [4]

If you haven’t served in the military, you probably won’t have been exposed to the 7.62×51 Nato cartridge. A survey conducted in 2021 showed that thirty-two percent of US citizens own guns, of which sixty-eight percent own rifles.
Few will know that the ammo is astoundingly similar to the military-designed 7.62×51 Nato cartridge.. You can shoot 7.62×51 ammo in a .308 rifle but not the other way round due to the pressure differences
The 7.62×51 military-developed cartridge is virtually identical to the .308 Winchester, but there are some essential yet subtle differences between the two cartridges. Let’s review the differences between these two great chamberings.

Can You Shoot 7.62 Out of a 308? (And Should You) [5]

You can shoot a 7.62 round in a .308 barrel, but not the other way around. However, it’s always best to use the ammunition recommended by the manufacturer because your rifle may explode
Read on to learn more about the 308 barrel and whether or not you can use 7.62 cartridges like the 7.62 Nato and the 7.62×51 with it.. Just because you can do something doesn’t mean that you should.
The worst-case scenario is the rifle explodes, causing serious injury to you or those around you.. You can avoid this possibility by simply using the recommended cartridge for your gun

  16 the meaning of life is math Ultimate Guide

.308 Winchester and 7.62x51mm NATO: interchangeable calibers ? [6]

Every physical dimension is measurable, and since our measurement systems are nothing but conventions, it is obvious that the same object can be measured in different ways and we can find a formula that allows us to convert values from one measuring system to the other, i.e. Imperial Units to Metric, with small approximation problems.
We can see that if we double the Celsius degrees, the same doesn’t happen with Fahrenheit, but we need to stick to the formula in order to get the most simple and accurate answer.. Same goes for length: you have a 150mm barrel and you want to see how that translates in inches, all you need to do is divide it by 2,54 and you get 5.9 inches.
To go from one system to the other, all we need is a simple formula. It is good to remember that some invariables are irrational numbers, with infinite values after the dot and so we need to round it up, just like we do with the Greek π which can make our calculations a little different.

Can You Shoot a 7.62 x 51 Ammo in a .308 Rifle? [7]

As an Amazon Associate I earn from qualifying purchases.. The straight answer to this question is yes, you can fire common 7.62X51 military ammo in any currently produced rifle chambered for .308 Winchester
The 7.62×51 NATO cartridge is specific and it is built for military specifications. The reason is to make the round able to operate both belt-fed machine guns and semi-automatic rifles
And it is best for operating the M14, machine guns, and other semi-auto gas guns that the military uses.. As for the .308 Winchester ammunition, the pressure limit is SAAMI standardized at 62.000 psi

Can I use a 7.62 in my .308 [8]

|Centerfire Rifles – Semiautomatic or Gas Operated Centerfire rifles, carbines and other gas operated rifles.. IIRC, you can use 7.62×51 ammo in a .308, but not the other way around.
Before we go much further, we want to address the oft-posed question “Are the .308 Winchester and 7.62×51 NATO one and the same?” The simple answer is no. There are differences in chamber specs and maximum pressures
That said, it is normally fine to shoot quality 7.62×51 NATO ammo in a gun chambered for the .308 Winchester (though not all NATO ammo is identical). Clint McKee of Fulton Armory notes: “[N]obody makes 7.62mm (NATO) ammo that isn’t to the .308 ‘headspace’ dimension spec

7.62×39 vs 308 – Rifle Rounds That Defined a Generation [9]

7.62×39 vs 308: The Cold War Rifle Cartridge Showdown. When it comes to the scholarly debate about the iconic rifle cartridges of the Cold War, the 7.62x51mm NATO (308 Winchester) and the 7.62×39 Soviet are always omnipresent in the discussion
Both are excellent cartridges and will serve you faithfully, but which is the better choice will depend mostly on your intended purpose.. In this article, we will investigate the origins and history of each rifle cartridge, their advantages and disadvantages, and which rifle cartridge is going to best suit your needs.
During the later stages of WWII, the Soviet Union decided that they wanted to develop an intermediate cartridge for their new battle rifle. They wanted this rifle cartridge to be suitable for a host of firearms, from a semi-auto carbine for close range to fully automatic machine guns for suppressive fire.

7.62 NATO vs. .308: Is There a Difference? [10]

The idea for a short-action cartridge rivaling .30-06 performance has been around since before the Depression. But once the M1 Garand carried us through World War II, military circles took up the short-.30 banner with an experimental infantry round.
In a fit of brilliance, Winchester snatched the design for its hunting roster and in 1952 dubbed it the .308. Army adopted the 7.62×51 cartridge and urged its acceptance by NATO, which complied in 1957.
When the M16 replaced the M14 in the Vietnam War during the 1960s (read my article comparing 5.56 NATO vs. .223 here), production of 7.62x51mm ammunition continued.

7.62×51 can be fired in .308 and vise virsa right? [11]

The most important difference between .308 Winchester and 7.62x51mm NATO is the chamber in the gun. 7.62 NATO chambers are much longer than .308 Winchester, to the point that a NO-GO gauge in .308 Win is still shorter than a 7.62 NATO GO gauge
This is pretty much the definition of an unsafe gun/ammo combination.. 7.62x51mm NATO gets away with these incredibly loose chambers because it has very thick brass
.308 Winchester is much thinner because it’s made in anticipation of a much tighter chamber; it won’t have to flow much, so it trades the extra case material for higher capacity. Because of the higher capacity and the civilian powders used in many .308 cases, .308 tends to get better performance than 7.62x51mm NATO.

  19 how to throw in road to the show 21 Quick Guide

Is it ok to shoot .308 in a rifle chambered for 7.62x51mm? [12]

Before we go much further, we want to address the oft-posed question “Are the .308 Winchester and 7.62×51 NATO one and the same?” The simple answer is no. There are differences in chamber specs and maximum pressures
That said, it is normally fine to shoot quality 7.62×51 NATO ammo in a gun chambered for the .308 Winchester (though not all NATO ammo is identical). Clint McKee of Fulton Armory notes: “[N]obody makes 7.62mm (NATO) ammo that isn’t to the .308 ‘headspace’ dimension spec
A commercial .308 Win round can exceed the max rated pressure for the 7.62×51. So, you should avoid putting full-power .308 Win rounds into military surplus rifles that have been designed for 50,000 psi max

Stupid?: Can you shoot 7.62×51 NATO in a .308 Winchester rifle? [13]

Can I shoot 7.62×51 NATO ammo through it with no problems?. Tried calling Savage, waited on the phone for 15 minutes and hung up.
Although there is a “slight” difference in the 308 vs 7.62 NATO rounds it’s much less that the 5.56/233 issue so YES, you can shoot the 7.62 NATO in your 308 bolt rifle with no danger.. FWIW, if the 5.56 round chambers with no problems in your 223 bolt rifle it too will be okay to shoot.
My understanding is that, while nearly identical, the 7.62×51 NATO ammo tends to be loaded hotter than commercial .308 and therefore one has to beware of higher chamber pressures. In a close tolerance “match” chamber, using this hotter ammo, it is said, can lead to overpressure causing a possible kaboom.

do you shoot .308 FACTORY ammo out of your 7.62×51 chamber semi-auto? [14]

do you shoot .308 FACTORY ammo out of your 7.62×51 chamber semi-auto?. Why wouldn’t you? If the rifle will eat it, it might be great practice ammo and be much cheaper than other stuff
Been doing it since the mid ’70s because I didn’t know you couldn’t until the Gore invented the internet.. I have observed that my LMT’s chamber’s headspace is VERY loose in relation to SAAMI .308 specs
I shoot MagTech M80 ball ammo through my LMT with good results…..it seems to burn clean too.. If a precision AR opens up to 3 MOA after 10 rounds of rapid fire, it has SERIOUS issues.However, most like who cares about super accurate AR’s, when we are talking AR’s, all rifles will be 3 MOA or more once you put a full 10 round mag through her no matter how quality your ammo is.

What’s the Difference? [15]

What’s the difference between 308 vs 7.62? Brace yourself for some obscure technical talk, because we’re going to answer that question.. First off, why would anyone even ask what’s the difference between 7.62 NATO and .308 Winchester? Probably because they have a rifle that says one or the other on the barrel, and they want to make sure it’s safe to shoot.
Most rifle owners do use these two calibers interchangeably, however.. Now, on to the fun stuff, because 7.62 NATO, also known as 7.62×51, is different from .308 Winchester, albeit not by much
After World War 2, sensible militaries wanted to transition to an intermediate rifle cartridge, similar to what the Germans had fielded with the StG44 and its 7.92mm round. The US Army Ordnance Corps has historically been notoriously difficult to convince that any sort of change is good

308 VS 7.62 NATO [16]

Perhaps you’ve felt overwhelmed looking for the best barrel length for 308? From bolt actions to semi-automatics, the…. Comparing .308 vs 7.62 NATO is like describing twin brothers with different personalities – these rounds are almost identical in every way
However, it turns out there are several legitimate distinctions between these two rounds. Though small, these details can impact how you use the .308 and 7.62 NATO.
Understandably, this can be confusing, so we’ll walk through it step-by-step.. Since these two rounds are identical in appearance, some might believe the .308 and the 7.62 NATO are the same round

  21 how to play 2 player on rocket league Ultimate Guide

Can you shoot .308 in a 7.62 x 51 and vice versa? [17]

Well, the time may come where 7.62 x 51, surplus or otherwise, may not be available. In fact, we had a form of that for almost a year already
The difference isn’t the size of the cartridge, it’s the chamber of the particular rifle. 7.65 x 51, has a thicker brass case and the shoulder is often “annealed” so that the cartridge will tolerate more headspace
This is a good idea anyway, when you happen to buy a surplus rifle. At some pont you may want to handload, although some munufacturers don’t recommend it

Can You Shoot 7.62×51 In A .308 Remington 700 Rifle? [18]

The Remington 700 is a bolt action rifle produced by Remington Arms that first debuted in 1962, applauded for its versatility, the 700 can be found in many different configurations, with changes in caliber, stock, and barrel all possible depending on your preference.. And whilst it is available in various different calibers, the most common utilizes the Winchester .308 round, the civilian version of NATO’s 7.62×51, however, there are differences between the two rounds and often confusion as to whether these rounds are interchangeable – something we aim to explain below.
Furthermore, Germany’s success with the STG-44 and Russia’s success with the AK47 had put pressure on the US Military to update their arsenal as soon as possible.. The US was looking for a cartridge that would be suitable for both short and long-range combat, and one that could also be suitable for both semi-automatic and fully automatic firing, especially as their counterparts had managed to successfully engineer fully automatic carbine rifles at this time.
In the civilian market, it became a resounding commercial success, especially amongst the hunting community – so much so, that it is still an extremely popular cartridge today! The Military then later approved the .308’s twin, the 7.62×51, for use in 1957.. The Remington 700 was developed as an upgrade to the previous Model 30 sporting rifles whilst also lowering the cost, this was done by using a cylindrical receiver produced by a cylindrical bar stock turned on a lathe instead of being machined – reducing the cost dramatically.

The UK’s Finest Independent Forum for Shooters and Gun Owners. Est 2010. [19]

Anything shooting related including law and procedure questions.. Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
I came across this article whilst trying to work out whether my LDT-M14 is chambered for .308 or 7.62×51 and I was curious what others thought.. I was told you never put a .308 round in a 7.62×51 NATO chambered rifle because of the pressure, but the above article suggests the pressure is comparable, it was just measured using different standards, hence the difference values
I came across this article whilst trying to work out whether my LDT-M14 is chambered for .308 or 7.62×51 and I was curious what others thought.. I was told you never put a .308 round in a 7.62×51 NATO chambered rifle because of the pressure, but the above article suggests the pressure is comparable, it was just measured using different standards, hence the difference values

7.62 NATO vs .308 Winchester ammo: What’s the difference? [20]

7.62 NATO vs .308 Winchester ammo: What’s the difference?. rifle, you should be fine firing any modern commercial .308 Win
Do a search on the internet for “7.62×51,” and you will get results for “7.62 NATO,” “.308 Winchester,” and multiple variants thereof. Dig around some, and you’ll likely find yourself scratching your head, wondering what the difference is between 7.62 and .308 rounds.
Do a search for “.308” and you will find similar results, albeit with fewer references to 7.62. 7.62x51mm) and .308 Winchester the same thing? Or are they different? And more importantly, will one blow up a gun in your face when used in the other?

Is there a hunting rifle that shoots 7.62×51? [21]

So I like Savage firearms, I have an 7mm Mag an old 110L model and I feel I am accurate with it, but man I am getting old and it’s gotta kick.. One day I would like to buy an AR-10 left handed, if Stag Arms ever decides to release it, but in the mean time I would like to buy a rifle chambered in .308 for this hunting season.
So I like Savage firearms, I have an 7mm Mag an old 110L model and I feel I am accurate with it, but man I am getting old and it’s gotta kick.. One day I would like to buy an AR-10 left handed, if Stag Arms ever decides to release it, but in the mean time I would like to buy a rifle chambered in .308 for this hunting season.

Can you shoot 308 ammo in a 7.62×51 rifle? [22]

The commercial .308 Winchester generates higher chamber pressures than military 7.62×51 does, and this may not be advisable practice for all 7.61×51 rifles. If in doubt, inquire with the manufacturer of the rifle before using commercial .308 ammunition.
You have to choose the selection of bullet when reloading 30-30 ammo for the type of bullet. A pointed bullet in a tubular magazine can present a problem when the rifle recoils
You are sending a .24 bullet rattling down a .30 barrel. It may or may not trap enough gas to cycle an autoloader

Is .308 and 7.62 NATO Interchangeable? [23]

There’s a lot of confusion regarding the similarities and differences between commercial cartridges and NATO cartridges. The two pairs of rifle cartridges most frequently discussed are .308 Winchester/7.62x51mm NATO cartridges (and .223 Remington / 5.56x45mm NATO ammo)
If your rifle is chambered in .308 Winchester, you can fire .308 Winchester and 7.62x51mm NATO in the rifle. If your rifle is chambered in 7.62x51mm NATO, you can only fire 7.62x51mm NATO in your rifle
You can check SAAMI (Sporting Arms and Ammunition Manufacturers’ Institue, Inc.) for their list of Generally Accepted Firearms and Ammunition Interchangeability.. What’s the Difference Between 308 Winchester and 7.62 NATO?

can you shoot 7.62 x51 out of a 308 rifle
23 can you shoot 7.62 x51 out of a 308 rifle Full Guide

Sources

  1. https://www.wideners.com/blog/308-vs-7-62-nato/#:~:text=Generally%2C%20you%20can%20shoot%207.62,it%20step%2Dby%2Dstep.
  2. https://www.reddit.com/r/canadaguns/comments/hh50dq/can_i_shoot_762x51_out_of_my_308_win/#:~:text=Yes%20you%20can.%20.,308%2C%20but%20nice%20the%20opposite.
  3. https://www.thearmorylife.com/7-62-nato-vs-308-is-there-a-difference/#:~:text=308%20rifles%20can%20chamber%20and,also%20safely%20fire%20both%20rounds.
  4. https://anthonyarms.com/gun/can-you-shoot-7-62×51-ammo-in-a-308-rifle/
  5. https://survivalfreedom.com/can-you-shoot-7-62-out-of-a-308-and-should-you/
  6. https://www.all4shooters.com/en/shooting/ammunition/winchester-308-762×51-nato-calibers/
  7. https://huntingheart.com/can-you-shoot-a-7-62-x-51-ammo-in-a-308-rifle/
  8. https://www.calguns.net/calgunforum/showthread.php?t=209053
  9. https://ammo.com/comparison/762×39-vs-308
  10. https://www.thearmorylife.com/7-62-nato-vs-308-is-there-a-difference/
  11. https://www.thehighroad.org/index.php?threads/7-62×51-can-be-fired-in-308-and-vise-virsa-right.376239/
  12. https://www.thehighroad.org/index.php?threads/is-it-ok-to-shoot-308-in-a-rifle-chambered-for-7-62x51mm.488476/
  13. https://www.ar15.com/forums/t_1_5/302561_Stupid___Can_you_shoot_7_62x51_NATO_in_a__308_Winchester_rifle_.html
  14. https://www.snipershide.com/shooting/threads/do-you-shoot-308-factory-ammo-out-of-your-7-62×51-chamber-semi-auto.173079/
  15. https://www.targetbarn.com/broad-side/308-vs-7-62/
  16. https://www.wideners.com/blog/308-vs-7-62-nato/
  17. https://wethearmed.com/rifles/can-you-shoot-308-in-a-7-62-x-51-and-vice-versa/
  18. https://legionary.com/can-you-shoot-7-62×51-in-a-308-remington-700-rifle/
  19. https://www.full-bore.co.uk/viewtopic.php?t=15005
  20. https://taskandpurpose.com/tech-tactics/762×51-vs-308-difference/
  21. https://www.northwestfirearms.com/threads/is-there-a-hunting-rifle-that-shoots-7-62×51.86131/
  22. https://www.answers.com/Q/Can_you_shoot_308_ammo_in_a_7.62x51_rifle
  23. https://www.opticsplanet.com/howto/308-winchester-vs-7-62x51mm-nato.html

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *